PPprint Printing-Kit for Bambu Lab X1 Carbon

Price:

94,50 

The ‘PPprint Printing-Kit for Bambu Lab X1 Carbon’ enables simple, high quality and reporoducible 3D printing of polypropylene (PP) on the Bambu Lab X1 series. The printing kit consists of the 3d printing bed ‘P-surface 141‘ (257mm x 257mm), the adhesive film ‘P-adhesive 220’ (257mm x 257mm), the ‘P-roller 621’ for applying the 3d printing bed, the P-cutter, as well as the ‘P-wipe 515’ and the ‘P-cleaner 298’ for cleaning and maintenance of the ‘P-surface 141’.

delivery time: 2-3 working days

Category:

Description

The ‘PPprint Printing-Kit for Bambu Lab X1 Carbon’ was specifically tailored to the Bambu Lab X1 series and includes everything you need for successful and reliable extrusion-based 3D printing with the polypropylene filament ‘P-filament 721‘. The included 3D printing build surface ‘P-surface 141’ guarantees optimized adhesion of the PP component during 3D printing and allows easy and non-destructive removal of the components after completion. The double-sided adhesive film ‘P-adhesive 220’ is used to fix the ‘P-surface 141’ in the 3D printer. The hand roller ‘P-roller 621’ makes it easier to apply the print run. In addition, ‘P-wipe 515’ and ‘P-cleaner 308’ can be used to advantage for cleaning and maintaining the ‘P-surface 141’ and thus have a positive effect on the service life of the ‘P-surface 141’.

For more information about the individual components of the ‘PPprint Printing-Kit for Bambu Lab X1 Carbon’, please refer to the descriptions of the individual products.

Products of the ‘PPprint Printing-Kit for Bambu Lab X1 Carbon‘:

P-surface 141 (257x257mm)

P-adhesive 220 (257x257mm)

P-roller 621

P-wipe 515

P-cleaner 308

P-cutter

Instructions for applying the ‘P-surface 141’

Cleaning and maintenance of the ‘P-surface 141‘: Before first use, wash out the ‘P-wipe 515’ thoroughly with lukewarm water. Shake ‘P-cleaner 308’ thoroughly before use. To clean the ‘P-surface 141’, apply enough ‘P-cleaner 308’ so that the entire surface is evenly covered with a paper towel after spreading. After a short soaking time of approx. 1 minute, the ‘P-cleaner 308’ can be completely removed with the paper towel. Finally, the ‘P-surface 141’ should be wiped off with the moistened ‘P-wipe 515’. After use, wash out the ‘P-wipe 515’ in clear water, wring out carefully and then pull into shape. Do not dry the ‘P-wipe 515’ in the sun or on radiators.

Security alert:

May cause burns if swallowed and enters the airways. It may cause skin irritation and eye irritation. Keep out of the reach of children. Wear protective gloves/eye protection. IF SWALLOWED: Call a POISON CENTER/doctor/first aid if you feel unwell. IF ON SKIN: Wash with plenty of water/soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists, seek medical advice/attention. Dispose of contents/containers in accordance with local regulations. Contains: Ethanol, alkyl glycosides (C8-C10), N,N-dimethyl-9-decenamide.

To our knowledge, this product poses no particular risk provided it is handled in accordance with good industrial hygiene and safety practice for the cleaning and maintenance of ‘P-surface 141’.

Labeling according to Regulation (EC) No 1272/2008 [CLP] is not applicable.

Safety-Datasheet
EAN number: 0049364177089

Additional information

Weight 3,0 kg